Cleaning the Washer Exterior and Door

Cleaning the Washer Exterior and Door

Keeping the outside of the washer and the door clean helps protect the finish and reduce moisture and odor.

Safety first - Unplug the appliance before cleaning to avoid the risk of electric shock. - Do not spray water inside the washer. This may cause fire or electric shock. - Do not use volatile substances such as benzene, paint thinner, alcohol, or acetone, and do not use abrasive cleaners or detergents with strong chemical components. These can discolor or damage the appliance, or may cause a fire. - Do not touch the surface or the display with sharp objects.

After each wash When a cycle is finished: - Wipe the door and the inside of the door seal to remove moisture. - Wipe the body of the washer with a dry cloth to remove moisture. - Leave the door open so the drum interior can dry. - Remove items from the washer as soon as the cycle is complete. Leaving damp items inside can cause wrinkling, color transfer, and odor.

Cleaning the exterior and door For regular cleaning: - Use a damp cloth to wipe the washer exterior. - Use a towel or soft cloth to wipe around the washer door opening and door glass. - Wash the door on the outside and inside with a damp cloth, then dry it with a soft cloth. - Immediately wipe off any spills.

Leaving the door open After you finish using the washer, leave the door open overnight to let air circulate and dry the drum. This helps prevent odors.

Cleaning the drum with Tub Clean Over time, residue can build up in the drum and lead to mildew or a musty odor.

Use the Tub Clean cycle: - monthly to remove residue and help prevent odor, - more often if the washer is used heavily or if odor is already present, - once a week for three consecutive weeks if mildew or a musty smell already exists.

Important limits: - Run Tub Clean only when the drum is empty. - Never load laundry while using this cycle. Laundry may be damaged or contaminated with cleaning products. - Do not exceed the maximum fill line when adding bleach or powdered cleaners. - Powdered cleaners may remain in the drum after cleaning.

How to run Tub Clean 1. Remove any clothing from the drum. 2. Add cleaning agents as directed below. 3. Close the door and press the Power button. 4. Select the Tub Clean cycle and press Start/Pause. 5. When the cycle ends, open the door and allow the drum interior to dry completely.

Cleaning agents for Tub Clean Use only the method that matches the cleaner you have: - Drum cleaner or lime scale remover: add to the main detergent compartment of the detergent dispenser. - Liquid chlorine bleach: add to the bleach compartment of the detergent dispenser. - Powdered cleaner: pull out the liquid detergent cup before adding it to the main detergent compartment. - Cleaning tablets: place directly into the washer drum. - For other drum cleaning products, follow the manufacturer’s instructions and recommendations.

If you use a descaler If you use a descaler or drum cleaner during Tub Clean, use the Rinse+Spin option to rinse the washer drum before running your next wash cycle.

Automatic Tub Clean reminder When the power is on and the tcL message blinks on the display, it means the washer drum needs cleaning. The reminder usually appears every one to two months, depending on how often the washer is used.

Hard water and mineral buildup In areas with hard water, mineral scale can form on internal components. Periodically clean mineral buildup to extend the washer’s lifespan. A water softener is recommended in hard-water areas. - Use a descaler to remove visible mineral buildup on the washer drum. - After descaling, always run the Tub Clean cycle before washing clothing. - Mineral scale and other spots may be removed from the stainless steel drum with a soft cloth soaked in stainless steel cleaner. - Do not use steel wool or abrasive cleaners.

Child safety during cleaning Make sure children and pets do not climb into the drum. Engage the Control Lock feature if needed to prevent children from accidentally starting a wash cycle.