LG · Laundry · WM4000HBA · Owner's Manual
Read This First: Safety Messages and Symbols
Read This First: Safety Messages and Symbols from LG WM4000HBA Owner's Manual. Read the extracted page 3-6, related manual answers, and source citation.
LG · Laundry · WM4000HBA · Owner's Manual
Read This First: Safety Messages and Symbols from LG WM4000HBA Owner's Manual. Read the extracted page 3-6, related manual answers, and source citation.
Source integrity
This extracted section stays tied to manual review status, source text, citation, original source URL, text export, manual catalog, related answers, and nearby source sections.
Section pages inherit the manual review and index status before they are treated as public source pages.
The manual section keeps extracted body text available on-page for inspection and citation.
The section carries its own citation string so the source page or page range remains visible.
The parent manual keeps its manufacturer, support, or source-host URL attached.
The parent manual exposes a public plain-text export for source verification and machine-readable use.
The parent manual exposes a machine-readable catalog with sections, questions, and coverage metadata.
Reviewed answers that cite this section link users from concise answers back to the exact source text.
Adjacent and same-topic manual sections keep the source page connected to the rest of the manual.
This source section links the manual text to the model hub, reviewed answers, troubleshooting, codes, parts, and nearby source pages.
This page preserves the extracted manual text, source citation, and neighboring source sections.
Use the model hub to compare this section with answers, guides, codes, and part references.
Reviewed answers cite this section directly so users can jump from a short answer back to the exact source text.
Troubleshooting pages use source manual context to keep checks connected to the product and manual trail.
Part references keep filters, racks, panels, pumps, and service items connected to the same product context.
Move through adjacent source sections or same-topic sections without returning to the full table of contents.
Before using the washer, read all instructions and keep them for later reference.
This manual and the appliance use a safety alert symbol to warn you about hazards.
Each safety message explains: - what the hazard is, - how to reduce the chance of injury, and - what may happen if the instructions are not followed.
To reduce the risk of explosion, fire, death, electric shock, scalding, or injury, follow all warnings and precautions in the manual.
Proper grounding helps reduce the risk of electric shock in the event of a malfunction or breakdown. The washer has a cord with an equipment-grounding conductor and a grounding plug. The plug must be inserted into an appropriate outlet installed and grounded according to local codes and ordinances. If you are unsure whether the appliance is properly grounded, check with a qualified electrician or service personnel. Do not modify the plug. If it does not fit the outlet, have a proper outlet installed by a qualified electrician.
Keep this safety information for future use.
LG WM4000HBA Owner's Manual, extracted pages 3-6
No. Run Tub Clean only when the drum is empty. Never load laundry during this cycle.
No. Press Start/Pause and wait until the tub or drum stops completely before loading, unloading, or adding items.
No. The manual says not to use the washer without the inlet filters. Doing so can cause leaks, malfunction, continuous valve opening, flooding, and property damage.
No. The manual says to never use automotive antifreeze. Use 1 gallon of nontoxic recreational vehicle (RV) antifreeze instead.
No. The manual says waterproof or water-resistant items must be washed only in the Waterproof, Bedding, Bulky/Large, or Jumbo Wash cycle.
Yes. All 4 bolt assemblies must be completely removed to avoid product damage.
No. They only list where the installation and operation instructions appear in the full manual.
Gently push or rock the top edges of the washer. If it does not rock, the washer is level enough for this procedure.
Clip the end of the hose into the elbow bracket, hang the hose over the side of the laundry tub, and secure it with the provided tie strap.
Allow at least 1 inch (2.5 cm) at the sides and 4 inches (10 cm) behind the washer, and leave extra space if wall, door, or floor moldings require it.
You are responsible for bringing the product, at your own expense, to the authorized service center for in-warranty repair.
It warns you about a potential hazard that can kill or injure you or others.
WARNING means you may be killed or seriously injured if instructions are not followed. CAUTION means you may be injured or cause damage to the product if instructions are not followed.
A level, solidly constructed floor is required. Concrete is best, and a wood floor is acceptable if it is built to FHA standards.
Stop the washer and check the drum and the drain filter for foreign objects such as keys, coins, or safety pins. If the noise continues after restarting, call for service.
Close and secure the door. If the message keeps appearing, unplug the power cord and call for service.
The manual lists pliers, a flat-blade screwdriver, and a level.
The drum may be overloaded, or the hot and cold water inlet hoses may be reversed.
Heavy wash loads can produce a thumping sound, and an out-of-balance load can also cause it. If the sound continues, stop the washer and redistribute the load; you can pause the cycle and do this after the door unlocks.
Flushing removes foreign substances like dirt, sand, or sawdust. The manual says these can damage the washer inlets and cause leakage.
This section is extracted from the official manual record and keeps its source citation attached.